Description The MaxxECU brand, has fast become my favourite ECU manufacturer. We install and tune these daily here at the ‘Tuningshed’. I’ve literally spent hours on the dyno, tuning them. We’ve installed countless setups too. We can offer advice on ECU selection, and even with setup and first start. Best of all, we can tune the vehicle for you too. I’ve started to upload some instructional videos onto my Youtube channel it will give you some idea of what we do, and more importantly, what these products can do for you and your project. The MaxxECU PDM20 is an advanced Power Distribution Module for MaxxECU units and is designed to replace fuses and relays in a modern way. maxxecu pdm pdm20 pve Max 230A 20 outputs (8x25A 8x15A 4x8A) 7 digital / analog 0-24V inputs All outputs can be PWM controlled Dedicated 5V power supply and sensor ground CAN bus for communication and setup management with MaxxECU MTune PC software Overcurrent protected adjustable levels with automatic restart with soft start option Warning levels for under over currents Works with all MaxxECU devices Support for CAN keypads Error code handling Built-in energy saving mode that draws only 0.004A MaxxECU PDM20 general -40 to 125 deg C temperature range Reverse polarity protection 6-22V operating voltage 32-bit ARM Cortex-M3 CPU 132x140x42mm (excluding protruding connectors) 1x 34-pin and 1x 26-pin Superseal connectors M6 screw for battery connection PC communication over CAN-bus via any MaxxECU to MTune MaxxECU PDM20 inputs 7 digital / analog (0-24V) inputs Software selectable 12V pullup CAN keypad (4,6,8,12 keys) MaxxECU PDM20 outputs 230A maximum current throughput All outputs are PWM capable Current and voltage measuring 6 outputs with H-bridge drivers Overtemperature protection Output overcurrent protection via emulated fuse characteristics and hardware backup protection Monitored 5V sensor supply output Outputs can be paired to increase current capacity More details on the MaxxECU Website MaxxECU ECU Videos
